Corega WLCBGMO User Manual

User ManualMISO Wireless broadband RouterCG-WLBARGMO

WLBARGMO Manual8 98 93.1.2 Windows XP O/S(1) Enter [Control Panel] -> click [Network Connection] -> right click and select [Open].(2) Click [Loc

8 9WLBARGMO Manual8 9(4) Click [General], select [Obtain an IP Address Automatically], and [Obtain DNS Server address automatically], and press [Advan

WLBARGMO Manual10 1110 11(5) Click [DNS] tab, unselect [Register this connection’s address in DNS], and press [OK].(6) Go back to [Internet Protocol T

10 11WLBARGMO Manual10 11(2) Right click [Local Area Connection], and select [Properties] *Note: Please check if TCP/IP had been installed in the [Loc

WLBARGMO Manual12 1312 13(4) Select [Obtain an IP address automatically], and [Obtain DNS server address automatically]. And click [Advance]. (5) Clic

12 13WLBARGMO Manual12 133.1.4 Windows 98/95/ME O/SThe configurations in all Windows 98/95/ME are the same, and this manual takes Windows 98 as an exa

WLBARGMO Manual14 1514 15 (4) Click [Gateway] tab, remove all the gateways, and press [OK] to close the window.(5) Go to [Network] and press [OK] to c

14 15WLBARGMO Manual14 153.2 Browser ConfigurationThe following examples are for Windows Vista/XP, skip this chapter if you are using Windows 2000/98/

WLBARGMO Manual16 1716 173. Uncheck the three boxes on the Local Area Network Setting page=>click[OK].4. Click [OK] on the [Internet Options] page.

16 17WLBARGMO Manual16 17(2) Click [Connections] tab -> select [Never dial a connection] -> click [LAN Settings].(3) Unselect all three options

WLBARGMO Manual18 1918 1918 193.2.3 Mac O/S(1) Open Internet Explorer (IE 5.0) Go to [Edit] in the menu bar, select [Internet Explorer Preferences].(2

18 1918 19WLBARGMO Manual18 194.1 Quick Network ConfigurationBasic configuration is required before connection your computer to the inter-net via WLBA

WLBARGMO Manual20 2120 21(5) Click [Quick Installation Setting].(6) When seeing this screen shot, click on [Next]. (7) Selec

20 21WLBARGMO Manual20 214.1.1 Auto obtain IP (DHCP) (1) If you are subscribing to auto obtain IP service ( or DHCP Dynamic IP) from your ISP, such as

WLBARGMO Manual22 2322 23(3) Click on [Save] to perform connection tests. (4) Within seconds, the result of the connection te

22 23WLBARGMO Manual22 234.1.2 Fixed IP(1) If you are subscribing Fixed IP connection from your ISP, then select [Fixed IP], and click on [Next].(2) E

WLBARGMO Manual24 2524 25(3) Click on [Save] to perform connection tests. (4) Within seconds, the result of the connection test will be appeared in th

24 25WLBARGMO Manual24 25(5) Open the web browser (IE 6.0), and test with any website for testing the connection.*Note: If the connection to the websi

WLBARGMO Manual26 2726 27(3) Click on [Save] to perform connection tests. (4) Within seconds, the result of the connection test will be appeared in th

26 27WLBARGMO Manual26 27(5) Open the web browser (IE 6.0), and test with any website for testing the connection.*Note: If the connection to the websi

WLBARGMO ManualPB 11. Product Introduction...31.1 Pack

WLBARGMO Manual28 2928 29(2) Go [Control Panel] -> [Network connection] again ->Right click [Wireless network connection] ,select [Available wir

28 29WLBARGMO Manual28 29<Windows XP (SP2) O/S>(1) Go [Control Panel], double click on [Network connection], right click on [Wireless Networks C

WLBARGMO Manual30 3130 3130 31(3) Connection status will appear in the bottom right of the screen. *Note: The wireless connection has been establishe

30 3130 31WLBARGMO Manual30 31To prevent from unlawful access to your network, you are recommended to perform wireless security setting. Type [192.168

WLBARGMO Manual32 3332 335.2 WPA SettingWPA is encrypted by a periodic update, making it more difficult to be hacked. Home users and company users are

32 33WLBARGMO Manual32 33<WPA-EAP>(1) Select [WPA2-EAP] or [WPA/WPA2-EAP](Recommended). in the column of [Authentication] a. [WPA2-EAP]: The 2n

WLBARGMO Manual34 3534 3534 35The chapter will briefly introduce all functions of this product, and spell them out. Log in the management program and

34 3534 35WLBARGMO Manual34 35type, [Link connection speed] - default setting is recommended.A. For [PPPoE]: Username Please enter username, given by

WLBARGMO Manual36 3736 37B. For auto obtain IP (DHCP) : Type Press [MAC address clone] to obtain the Ethernet card's MAC address.Computer namePle

36 37WLBARGMO Manual36 37WAN IP addressPlease refer to your ISP internet service information.Subnet maskDefault gatewayMTU Maximum Transmission Unit.

WLBARGMO Manual2 32 32 3<WPA-EAP>...336. Function

WLBARGMO Manual38 3938 39<WAN setting/Other setting>VPN PPTP pass through VPN pass-through function enable/disable.VPN IPSec pass through VPN p

38 39WLBARGMO Manual38 39(1) Select [Enable] to enable DHCP server function. Default is [enable].(2) Enter DHCP servers start IP and end IP.(3) Then c

WLBARGMO Manual40 4140 41<Wireless setting/802.11g/b setting>ESSID ESSID is a name that makes wireless adapter identify this Router . The defau

40 41WLBARGMO Manual40 41<Wireless setting/802.11g/b security setting>This section contains WEP,WAP-PSK, WPA2-PSK, WPA-EAP and WPA2-EAP encrypti

WLBARGMO Manual42 4342 43<Security setting>Configuring firewall and no response to WAN Ping requests.<Security setting/Connection control>

42 43WLBARGMO Manual42 43(6) Please click on [save] button to store the information.<Security setting/filter list>This function can forbid users

WLBARGMO Manual44 4544 45 <Advanced setting/DMZ>If the online game’s port range is unknown, or its parameter is different every login,

44 45WLBARGMO Manual44 45<Advanced setting/Routing Table/Routing Table>All routing logs are displayed in the table. <Advanced setting/UPn

WLBARGMO Manual46 4746 47<Management>Admin login name User name for login this management program.Default setting is [root].Admin login passwo

46 47WLBARGMO Manual46 47*Firmware update(1) Click [Browse] to open the data folder. Follow the route that the firmware saves to select the file.(2)

2 32 3WLBARGMO Manual2 3Corega WLBARGMO is a MISO wireless broadband Router with IEEE802.11g wireless access point standard. Its MIMO XR technique can

WLBARGMO Manual48 4948 49 The activation processes are as follows:(1) Select [Enable].(2) Indicate 1 ~ 9600 for parameters of port range. e.g. ) 8080

48 49WLBARGMO Manual48 49<Status/Log Display/system log>System log is displayed in the table.<Status/Log Display/E-mail function>An E-mail

WLBARGMO Manual50 5150 5150 5150 5150 51When the installation fails or the connection doesn’t succeed, it’s recommend-ed to take the following actions

50 5150 5150 51WLBARGMO Manual50 5150 51 (8) Has all information provided by your ISP been entered correctly? (9) Are the settings of your web browser

WLBARGMO Manual52 5352 5352 53<Windows XP/ 2000>(1) Click [Start] => [Programs] => [Command prompt].(2) Input [ipconfig] => [Enter].(3)

52 5352 53WLBARGMO Manual52 53Compliance Standard WLAN:IEEE802.11, IEEE802.11b, IEEE802.11gLAN:IEEE802.3, IEEE802.3u, IEEE802.3xInterface 　 WAN:10/10

WLBARGMO ManualFederal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for a Class B

www.corega.com.twPN: T30-UM8411-00 Rev.Dwww.corega-asia.com7F., No. 10, Lane 345, YangGuang St. Nei-Hu Chiu, Taipei City 114, Taiwan R.O.C.TEL: +886

WLBARGMO Manual4 54 54 51.3 Hardware Introduction 1345762 891110 1. Reset Button Press this but

4 54 5WLBARGMO Manual4 52.1 Hardware InstallationFollowing the steps below to set up WLBARGMO and the connection.(1) Insert the cable connector into

WLBARGMO Manual6 76 76 73.1 TCP/IP ConfigurationThe following steps and screenshots maybe dissimilar in different operating systems. This manual take

6 76 7WLBARGMO Manual6 74. Select [Internet Protocol Version 4 (TCP/IPv4)]=>click [Properties]。5. Select the [General] tab=>click both [Obtain